Vacuum unit - r+r
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Hydraulic braking system › Vacuum unit - r+r
VACUUM UNIT - R+R
Removing
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Loosen the band and disconnect the vacuum pipe from the vacuum unit.
2. Undo the bolts (2a) and remove the vacuum unit (2b) complete with gasket.
Refitting
- Place the vacuum unit complete with a new gasket back in its housing and tighten the bolts to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Vacuum pump | Bolt | M8 | 2.7 ÷ 3.3 | 1.9 JTD 8v |
- Connect the vacuum pipe to the vacuum unit and tighten the band.
Op. 1016A10 SOUND-PROOFING COVER - R.R
Removing
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Loosen the band and disconnect the vacuum pipe from the vacuum unit.
2. Undo the bolts (2a) and remove the vacuum unit (2b) complete with gasket.
Refitting
- Place the vacuum unit complete with a new gasket back in its housing and tighten the bolts to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Vacuum pump | Bolt | M6 | 0.4 ÷ 0.6 + 50° | 1.9 JTD 16v |
- Connect the vacuum pipe to the vacuum unit and tighten the band.
Parts & tools for this job For 2007 Fiat Bravo
- PARTBrake padsSearch: Fiat Bravo 2007 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.