CONTROL PANEL - R+R

Operation 5560B10 · ANALOGUE CONTROL PANEL

Removing

Op. 5580C18 AIR BAG MODULE - R+R

Op. 4110A10 STEERING WHEEL - R+R FOR REPLACEMENT OR CHECKS

Op. 7040A26 STEERING COLUMN TRIM - R+R

Op. 5550A10 STALK UNIT ASSEMBLY - R+R

1. Undo the bolts.

2. Move the instrument panel slightly.

1. Detach the electrical connection.

2. Keep the control panel.

Refitting

- Check that the control panel is not damaged.

- Attach the electrical connection.

- Position the control panel.

- Tighten the bolts.

Op. 5550A10 STALK UNIT ASSEMBLY - R+R

Op. 7040A26 STEERING COLUMN TRIM - R+R

Op. 4110A10 STEERING WHEEL - R+R FOR REPLACEMENT OR CHECKS

Op. 5580C18 AIR BAG MODULE - R+R

Several of the CAN nodes, including the instrument panel, are programmed with default settings that the customer will find when they acquire the vehicle. If the panel is replaced, the Parts Dept. will send a "pristine" component. once fitted, the data memorized in the Body Computer must be transferred to it by carrying out the "PROXY ALIGNMENT" procedure using the Examiner.

- Check that the control panel instruments are working.