Single tappet cover - r.r. and replace gasket

Make

Fiat

Model

Bravo Factory Service Manual

Year

2007–2014

Section

Cylinder head/s › Single tappet cover - r.r. and replace gasket

EngineSingle tappet cover - r.r. and replace gasket

SINGLE TAPPET COVER - R.R. AND REPLACE GASKET

Operation 1016A20 · TAPPET COVERS

1.9 JTD 8v

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Loosen the bands and disconnect the oil vapour pipes from the cam cover.

2. Undo the bolts (2a) and remove the cam cover (2b).

Refitting

- Place the tappet cover in position and secure it by tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Tappet cover	Bolt	M6	0.8 ÷ 1.0

- Connect the oil vapour pipes to the tappet cover and tighten the bands.

Op. 1016A10 SOUND-PROOFING COVER - R.R

08 Engine