CRANKSHAFT PULLEY - R + R

Operation 1092A10 · CRANKSHAFT PULLEY AND IDLE PULLEYS

1.9 JTD 8v, 1.9 JTD 16v

Removing

- Position the vehicle on a lift.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1092G10 SINGLE ENGINE BELT - R.R

1. Undo the bolts and remove the lower flywheel guard.

2. Fit the flywheel lock.

1. Undo the bolts (1a) and remove the service pulley (1b).

Refitting

- Position the service pulley in its housing and tighten the bolts to the recommended torque.

- Remove the flywheel lock.

- Place the lower flywheel guard in its housing and secure it using the bolts.

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

- Remove the vehicle from the lift.

1.4 16v

Removing

Op. 1092G10 SINGLE ENGINE BELT - R.R

1. Undo the bolts (1a) and remove the service pulley on the crankshaft (1b).

Refitting

- Position the service pulley on the crankshaft in its housing and tighten the bolts to the recommended torque.

Op. 1092G10 SINGLE ENGINE BELT - R.R

1.4 16v TJet

Removing

Op. 1092G10 SINGLE ENGINE BELT - R.R

1. Undo the bolts (1a) and remove the service pulley on the crankshaft (1b).

Refitting

- Position the service pulley on the crankshaft in its housing and tighten the bolts to the recommended torque.

Op. 1092G10 SINGLE ENGINE BELT - R.R