Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Bravo Factory Service Manual (2007-2014)22 · Fault diagnosis
22 · Diagnostics

Connect audio not working

Make
Fiat
Model
Bravo Factory Service Manual
Year
2007–2014
Section
Radio and accessories etc. › Connect audio not working
Fault diagnosisConnect audio not working

CONNECT AUDIO NOT WORKING

Connect

Audio not present from all sources (radio, CD, phone, navigation system)

TEST RESULTS
1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Use the tester to connect to the Connect system and check for errors

Move on to Step 3 for versions without audio amplifier.

Move on to Step 2 for versions with audio amplifier

1. Speaker wiring interrupted/short circuited

2. Speakers defective.

1. Restore the correct wiring

See E4091 CONNECT

2. Replace the speakers

2ELECTRICAL CONNECTION CHECKALL OKPROBLEMS ENCOUNTEREDACTION

For version with audio amplifier:

Release the Connect from the dashboard and check that the connection with the speakers is properly fitted

See E3510 RADIO

Check the audio controls on the steering wheel if present

Move on to Step 3

1. Speaker output connection at the audio amplifier not properly connected

2.Audio controls on steering wheel defective

1. Connect the connection correctly

2. Restore correct operation

See E4091 CONNECT

3CONNECT POWER SUPPLY CHECKALL OKPROBLEMS ENCOUNTEREDACTION

Check that the power supply for the connect is correct

See Test 5580PD CENTRAL CONSOLE OPERATION CHECK

Move on to Step 4Supply not correct

Restore correct power supply

See E4091 CONNECT

4CHECK AUDIO SIGNALSALL OKPROBLEMS ENCOUNTEREDACTION

Check for audio signals

See T LOUDSPEAKER OPERATION CHECK

End of Diagnosis for versions without audio amplifier.

Move on to Step 5 for versions with audio amplifier

Audio signals at the Connect output interrupted because the final audio stage is interruptedReplace the Connect unit
5AUDIO AMPLIFIER CHECKALL OKPROBLEMS ENCOUNTEREDACTION

For version with audio amplifier:

Check that the audio amplifier is correctly supplied

See T LOUDSPEAKER OPERATION CHECK

End of diagnosis

1. Audio amplifier not correctly supplied

2. Audio amplifier defective

3. Wiring defective between Connect and audio amplifier

1. Restore correct power supply

See E3510 RADIO

2. Replace amplifier

3. Restore correct wiring

See E3510 RADIO

Parts & tools for this job For 2007 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.