Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Bravo Factory Service Manual (2007-2014)22 · Fault diagnosis
22 · Diagnostics

Horns working endlessly

Make
Fiat
Model
Bravo Factory Service Manual
Year
2007–2014
Section
Radio and accessories etc. › Horns working endlessly
Fault diagnosisHorns working endlessly

HORNS WORKING ENDLESSLY

TEST RESULTS
1RELAY CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Remove the horn relay feed and check that the horns stop making a sound.Move on to Step 2

1. The horn continues to sound even without the relay

2. The horn stops working

1. Electrical contact in the engine compartment junction unit.

Replace engine compartment junction unit

See E3010 HORNS

2. Replace the relay

2CHECK THE WIRINGALL OKPROBLEMS ENCOUNTEREDACTION
Check the insulation of the connection between the clock spring on the steering column switch unit and earthEnd of diagnosis

1. Wiring insulation not correct between clock spring and earth.

2. Clock spring short circuited

1. Restore the correct insulation.

2. Replace the clock spring.

3HORN ELECTRICAL CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the button on the steering wheel is working properlyMove on to Step 4Button on steering wheel mechanicall stuckReplace the button on the steering wheel.

Parts & tools for this job For 2007 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.