Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting rail (page 2 of 2)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (98 range, 1910 JTD)
10 EngineRemoving-refitting rail · page 2 of 2
Diagram showing fuel pipes and connections on the engine
Close-up diagram of a fuel rail component with retaining nuts
Diagram showing a fuel pressure sensor connector with removal arrows
Diagram showing a pipe fitting connection with an arrow indicating the point of action
1. Remove the return manifold by loosening both retaining nuts. 2. Remove the fuel delivery pipe from the pressure pump to the rail pipe. 3. Disconnect the electrical connection from the fuel pressure sensor 4. Unscrew the remaining nut securing the rail and remove.

NOTE To refit, carry out removal instructions in reverse order. Tighten the fittings of pipes between return manifold and injectors and of the fuel delivery pipe from the pressure pump to the specified torque of 2 daNm.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.