Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting power unit (page 2 of 5)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1581 16v)
10 EngineRemoving-refitting power unit · page 2 of 5
Diagram showing the relay and fuse box area with a screw indicated by an arrow
Diagram showing the relay and fuse box removed to one side within the engine bay
Diagram of the i.e. ECU support bracket area with icons indicating removal direction
  1. Remove cover of relay and fuse box by undoing screw indicated.
  2. Remove nuts retaining relay and fuse box to battery holder, then place box to one side.
  3. Disconnect i.e. ECU supply connector
  4. Remove nuts retaining i.e. ECU support bracket, then remove the ECU from the engine bay. The nuts indicated also retain the starter motor supply wires and the joint between the front lead and the injection lead.
  5. Remove screws (1) and loosen (2) retaining battery holder to body. Before removing the holder, disconnect the underlying retaining clip.
Diagram showing the battery holder being removed from the engine bay
Diagram showing the battery holder with callout numbers 1 and 2 indicating screws and a loosening point

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.