Removing-refitting power unit (page 3 of 5)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (1581 16v)

10 EngineRemoving-refitting power unit · page 3 of 5

1. Remove the fan by undoing the retaining clips. Take care to disconnect the supply connections.
2. Remove the screws indicated in the figure, which retain the radiator to the front beam. Then remove the radiator from the engine bay by lifting upwards.

3. Lift protective cover, then remove starter motor supply lead.
4. Disconnect connectors for the joint between front leads and injection leads.
5. Undo screw shown in figure to remove relay carrier bracket protective cover. Disconnect connectors from relays and absolute pressure sender unit.

02 Engine