Removing-refitting power unit (page 5 of 5)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (1581 16v)

10 EngineRemoving-refitting power unit · page 5 of 5

1. Drain power steering fluid, then disconnect fluid intake from reservoir and pressure delivery line from power steering pump. Arrange a suitable container below the vehicle to recover remaining fluid.
2. Unstake and then remove wheel hub retaining nut (gearbox end and timing end).
3. Remove gearbox end wheelarch plastic protection by undoing screws and retaining studs shown in the figure. Disconnect brake pad wear sensor connection to remove protection.
4. Remove nut retaining steering link head to pillar, then remove from pillar arm by means of extractor 1847038000 (repeat the operation for both heads).

02 Engine