Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting power unit (page 4 of 5)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1581 16v)
10 EngineRemoving-refitting power unit · page 4 of 5
Diagram showing clutch cable connection with callout numbers 1, 2, and 3
Diagram showing reaction link and gear selection/engagement levers
Diagram showing accelerator cable and heater pipe connections with directional icons
  1. Disconnect the clutch cable by undoing nut (1) and lock-nut (2) shown in figure. Also disconnect earth lead (3) from gearbox.
  2. Disconnect reaction link shown in box and gear selection/engagement levers from gearbox.
  3. Disconnect accelerator cable.
  4. Disconnect input and output pipes from heater. Disconnect at points shown in figure.
  5. Disconnect fuel input and outlet lines evaporation control system line and absolute pressure sender unit pipe from intake manifold. Remove support bracket (1) to facilitate fuel line removal.
Diagram showing heater pipe and fuel line connection points with arrows
Diagram showing fuel lines and support bracket (1) on intake manifold

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.