Removing-refitting power unit (page 10 of 11)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (1998 20v)

10 EngineRemoving-refitting power unit · page 10 of 11

1. Undo the bolts fixing the track control arm (right and left sides) to the front cross member; suitably rotate the track control arm to release it from the front cross member.
2. Remove the fixings shown in the diagram for the heat shield to allow the subsequent extraction of the front cross member.
3. Undo the bolts fixing the front cross member to the bodyshell; firstly remove the rear bolts then remove the side ones and then with the help of a second operator, extract the cross member complete with stabilizer bar.
4. Remove the bolts shown in the diagram from the bell housing to allow the subsequent positioning of the power unit supporting tool.

02 Engine