Removing-refitting power unit (page 4 of 11)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (1998 20v)

10 EngineRemoving-refitting power unit · page 4 of 11

1. Disconnect the butterfly casing cooling pipe from the expansion tank; also disconnect the pipe for the anti-evaporation system shown in the diagram.
2. Remove the reaction rod acting on the fixing bolts.
3. Remove the engine compartment lower shield.
4. Place a suitable container underneath the radiator, then drain the coolant acting on the special tap in the lower part of the radiator.
5. Disconnect the two coolant pipes from the radiator.

02 Engine