Removing-refitting power unit (page 9 of 11)

1. Disconnect the union (1) for the pipe connecting the reservoir to the steering box from the box. Place a suitable container underneath to collect the fluid remaining inside the pipe.
2. Remove the centre power unit support.

Before proceeding with the removal of the centre engine support, place a hydraulic jack under the engine to support it and keep it in position until the power unit supporting tool is in place.

3. Remove the bolts fixing the power assisted steering box to the cross member. Attach the box to the bodyshell.
4. Disconnect the rods connecting the stabilizer bar to the track control arm (right and left sides) to allow the subsequent removal of the front cross member.