Removing-refitting power unit (page 6 of 11)

1. Undo the bolts fixing the power assisted steering fluid reservoir; disconnect the pipe connected to the power assisted steering pump then temporarily fix the reservoir to the engine, as appropriate.
2. Remove the upper cover protecting the climate control compressor.
3. Disconnect the connector on the compressor and the pipes connecting the climate control compressor to the evaporator and the compressor to the condenser.

Seal the disconnected pipes so that they do not absorb humidity into the climate control system which would adversely affect its operation.

4. Remove the windscreen wiper blade acting on the fixing nut.
5. Remove the right side shield for the pollen filter; to facilitate its removal, loosen the bolts fixing the left shield.