Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)03 · 18 Clutch
03 · Transmission

Components of clutch pedal (page 2 of 3)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Clutch operation (99 range)
18 ClutchComponents of clutch pedal · page 2 of 3
Diagram showing the relay protective cover and surrounding components in the engine compartment
Diagram showing the relay bracket, nuts, and electrical connections
Diagram showing the bulkhead lining stud and routing of lines
  1. Remove the relay protective cover.
  2. Unscrew both nuts retaining the relay bracket, disconnect the connection indicated and position the bracket to one side.
  3. Remove the stud retaining the lining of the bulkhead between lining to one side.
  4. Drain the brake and clutch fluid from the reservoir after disconnecting the level gauge connector and removing the reservoir cap.
  5. Disconnect the central line connected to the clutch pump, marked "FRIZ", from the reservoir.
Diagram showing a hand using a tool to disconnect a line from the clutch pump reservoir
Diagram showing the clutch pump reservoir with the central line marked FRIZ being disconnected

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.