Gear change cable (page 5 of 5)

1. Remove the split pin (1) and bracket (2) securing the gear change cable to the selector lever. 2. Undo the nuts securing the selector lever mounting and remove the mounting. 3. Disconnect the gear change cable from the selector lever mounting; then replace the cable. Dismantling selector lever 4. Undo the bolt securing the clip retaining the supply cables to the shift-lock device and additional PARK position switch. 5. Undo the nuts securing the additional PARK position switch (1); if the shift-lock device (2) has to be worked on, undo the bolts shown in the figure.