Removing-refitting brake pump
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Hydraulic operation (99 range) › Removing-refitting brake pump
33 Braking systemRemoving-refitting brake pump
REMOVING-REFITTING BRAKE PUMP
Carry out operations described for removal of the brake and clutch fluid reservoir (1910 TD), but without disconnecting the hydraulic clutch and placing the reservoir to one side.
- Use wrench 1856132000 to disconnect the brake line fittings from the brake pump.
Bleeding brake system
- Unscrew both nuts retaining the brake pump to the brake servo, then remove the pump from the car.
Reverse removal instructions to refit, taking care to fit the brake pump properly to the brake servo rod and washer.
Parts & tools for this job For 1995 Fiat Bravo
- PARTBrake padsSearch: Fiat Bravo 1995 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.