Hydraulic operation

Hydraulic operation

1. Disconnect electrical connection from the ignition, then unscrew the bolts fastening the steering column and remove from the car.
2. Disconnect the braking light switch connector.
3. Unscrew both nuts retaining the accelerator pedal retaining bracket and release the clutch pedal return spring from the bracket.
4. Disconnect the control cable from its anchorage on the accelerator pedal, then remove the accelerator pedal from the vehicle.
5. Remove rubber fitting (1) from the bonnet opening lever and then release the end of the opening cable from its seat and take out through the housing hole of rubber fitting (1).