Removing-refitting servo brake (page 2 of 2)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Hydraulic operation (99 range)

33 Braking systemRemoving-refitting servo brake · page 2 of 2

1. Remove the brake pump without disconnecting the connected brake lines, in order to release the brake servo rod from the pump.
2. Release the injection wiring bundle from the retaining clip, then disconnect the vacuum intake line from the brake servo.
3. Working from inside the cabin, remove the left foot rest, located beside the clutch pedal.
4. Remove the bolt retaining the lower steering column to the power steering box pinion.
5. Remove the steering column reinforcement bar by unscrewing the retaining bolts indicated in the figure.

05 General