Hydraulic operation (page 2 of 2)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Hydraulic operation (99 range)

33 Braking systemHydraulic operation · page 2 of 2

1. Remove the roll pin retaining the clutch pump rod on the control pedal.
2. Release the electrical connector shown in the figure from the pedal mount.
3. Remove the roll pin retaining the brake servo rod to the control pedal transmission.
4. Remove nuts retaining the pedal unit to the body, then remove the pedal unit and servo brake from the body by releasing the clutch pedal from the clutch pump rod.
5. At the bench, unscrew the four bolts retaining the brake servo to the pedal unit.

05 General