Operation

OPERATION

ON/OFF

The set can be turned on and off in two ways.

1. Press knob A (VOL).
2. Turn on/off by means of car ignition switch. This function may be set in the EXPERT control level. Manual activation and deactivation are possible at all times in this case.

NOTE: if the EXPERT "IGN" function is not active, the radio goes off automatically 20 minutes after the engine is turned off.

ADJUSTING VOLUME AND SOUND

Volume

Adjust to required volume by means of knob A (VOL).
the display shows: «VOL 00» «VOL 31».

Adjusitng sound

For each of the settings BASS, TREBLE, FADER, BALANCE, LOUDNESS:

1. Select functions by pressing the AUD key once or more.
2. Select the required sound setting by means of key A or select the basic setting: press the AUD key for longer than 2 seconds until the display shows «CENTER» Or «- -«.
3. Finish adjustment: press the AUD key several times until the display shows «VOL ...».

NOTE: the radio comes with a sound reproduction condition memory specific to each source type. This makes it possible to set different sound geometries (FADER, BALANCE) and frequency responses (BASS, TREBLE, LOUDNESS) for radio, cassette and phone sources (Automatic Sound Memory function)..After about 5 seconds, the control level with the current settings is automatically abandoned.