Tuning

TUNING

Tuning RDS stations/programmes with automatic search for stations

1. Use key BN to select the range:: FM1, FM2, FM3, MW or LW.
   The automatic search within FM ranges operates with two degrees of sensitivity. During the first search through the reception range, the search is carried out for stations with high field intensity (local stations). The second search seeks stations with low field intensity (distant reception). The message "DX" appears on the display during the search.
   The DX function may be deactivated (see chapter on EXPERT control level)
2. An automatic search in the required direction may be started by giving a short press to one of the keys A or B. The display shows the relevant frequency: when a station with an identification code is found, this is shown on the display. Otherwise the frequency indication remains.
   If the RDS station/programme tunes within the selected range, it is stored on a selection key for stations 1 to 6. The relevant number appears on the display, e.g. "3" for memory position 3.
3. If the tuned station is to be stored on a selection key, proceed as described in the paragraph on station selection keys.

Recalling stored RDS station/programme

Use the BN key to select the range: FM1, FM2, FM3, MW or LW.
Give a short press to the selection key for stations 1 to 6.
Even if the radio power supply is disconnected, the memory contents of the station selection keys are maintained.

Manual frequency tuning

1. Use key BN to select the range:: FM1, FM2, FM3, MW or LW.
2. Pres one of the keys A or B for 2 seconds until "MAN" appears on the display and the frequency tuning is not visible. Continual switching takes place during fast forward when one of the keys is held down.
3. Use keys A or B to tune in the required direction: the frequency will be increased or reduced by 50 Hz while in FM or 1 kHz in AM.
4. If the tuned station is to be stored on one of the station selection keys, proceed as described in the paragraph on "Station selection keys".
5. Conclusion of manual frequency tuning: give a short press to one of the station selection keys from 1 to 6.

NOTE: If no key is pressed for 60 seconds, manual frequency tuning is automatically concluded.

Automatic station storage: AUTOSTORE

Automatically store the most powerful stations in the selected local reception range on station keys 1 to 6.
Range selection: FM 1, FM 2, FM 3, MW or LW.
Press the BN key for more than 2 seconds until the message "AS" appears on the display and the frequency indication changes.
The station with the best reception can be heard at the end of the search.