TAPE PLAYER - version H3

TAPE PLAYER - version H3

Activating tape operation

Place a tape in the slot. «TAPE A» or«TAPE B» appears on the display.

If the slot already contains a tape, press the SRC repeatedly until «TAPE» appears on the display.

SRC = Source; the sources are: RADIO, TAPE, CDC.

Changing the tape side

Press the D REVERSE key briefly.

When the end of the tape is reached the side changes automatically.

The meanings of the symbols on the display are as follows:

"TAPE A" : top side of tape

"TAPE B" : bottom side of tape.

MSS function

MSS = Music-Search-System

This function can be used to forward/rewind to the beginning of the track to obtain the "skip track" or "repeat track" function.

Pauses of at least 3 seconds are left between tracks for the MSS function (without an announcement text). Musical pieces with very low passages (e.g. classical music) are not suitable because these are treated as pauses.

Activating MSS

The MSS function can be turned on or off from the EXPERT menu; the standard condition is MSS ON

In this configuration, press key B to make the radio skip a number of tracks corresponding to the number of presses on the key; «+ --« appears on the display.

Example: 3 short presses on the key: skip three tracks;; «+3» appears on the display.

When keys A or B are pressed for longer than 2 seconds, the CD player is made to forward/rewind fully to the end of the tape.

If the MSS function is deactivated ( from EXPERT) a short press on key A or B allows fast forward or fast rewind of the tape.