Dismantling-fitting one-piece rear cushion

DISMANTLING-FITTING ONE-PIECE REAR CUSHION

1. Remove the cushion from the car (see previous page). Release plastic moulding A as shown in the figure. Remove upholstered cushion.

2. Fold back the cover and use cutting pliers to cut hooks B fastening the padding cover around the edges of the upholstery.

Then remove all residual parts of the hooks attached to the padding to prevent damage to the new cover.

NOTE Use tool 1878077000 when refitting to fasten the cushion hooks

Use new hooks.

DISMANTLING-FITTING ONE-PIECE REAR SQUAB

1. Fold down the squab. Unscrew bolts A retaining the squab to the bracket, then remove the squab from the car.