Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Removing-refitting rear seat

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Seats › Removing-refitting rear seat
70 BodyworkRemoving-refitting rear seat

REMOVING-REFITTING REAR SEAT

Line drawing showing the rear seat cushion being lifted from the car body, with bolts visible at the front and rear mounting points.
  1. Unscrew the bolts fastening the cushion to the body, then take out of the car.
Line drawing showing the underside of the rear seat squab (cushion base) with bolts and washers indicated for removal.
  1. Lower the squab, then unscrew the bolts with associated washers.
  2. Use tool 1878077000 to undo the studs fastening the boot trim to the squab.
  3. Remove the squab from the car.

NOTE To refit, carry out removal instructions in reverse order. Tighten retaining bolts to a torque of 2.4 daNm.

Line drawing showing a hand using a long tool to remove studs from the rear of the seat squab frame inside the car.
Line drawing showing the bare metal frame of the rear seat squab installed in the car, with the boot trim removed.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.