Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Removing-refitting seat raise device

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Seats › Removing-refitting seat raise device
70 BodyworkRemoving-refitting seat raise device

REMOVING-REFITTING SEAT RAISE DEVICE

Diagram showing the outer trim A and trim B of the seat raise device with screws indicated for removal.

The seat need not be removed from the car.

  1. Position the seat fully forward and fully raised. Unscrew screws retaining outer trim A. Turn trim B upward.
    2. Diagram showing the removal of panel C covering the seat raise lever fastener, highlighting tabs and the use of a screwdriver.
  2. Remove panel C covering seat raise lever fastener. Take care not to break the tabs. Remove the lower part by hand (box 1) and then use a screwdriver to prise up the upper tab (box 2) and remove the panel.
  3. Remove lever D and drill off the head of rivets E.
  4. Unscrew bolts F retaining the seat raise device and then remove.

NOTE Reverse removal instructions to refit. Tighten retaining bolts to a torque of 1.2 daNm.

Two diagrams: on the left, a drill removing rivet heads E from lever D; on the right, the seat raise mechanism with bolts F and component G indicated.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.