Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Rear seat cover removal

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Seats › Rear seat cover removal
70 BodyworkRear seat cover removal

Rear seat cover removal

Diagram of rear seat back showing side fasteners A, central belt carrier bolts B, and head restraint key C.
  1. Remove side fasteners by unscrewing bolts A. Take off the central belt carrier by unscrewing bolts B. Remove the two side head restraints and the central head restraint by pushing key C on the plastic bushes.
Diagram of upholstered squab module showing cover plastic mouldings A being released from the reinforcement channel and plastic bushes B being removed.
  1. Release cover plastic mouldings A from the reinforcement channel. Remove plastic bushes B by moving the padding and undoing the clip. Remove the upholstered squab module.
Diagram of the upholstered squab module with the cover folded back to show hooks C retaining the cover to the padding around the edge of the upholstery.
  1. Fold back the cover and cut hooks C retaining the cover to the padding around the edge of the upholstery.

Remove all residual parts of hooks attached to the padding to prevent damage to the new cover.

NOTE Reverse order of removal instructions to refit. Fasten the hooks using tool 1878077000.

Use new hooks.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.