Removing-refitting front seat guides

REMOVING-REFITTING FRONT SEAT GUIDES

NOTE Upholstering operations are not required.

1. Remove the seat from the car. Position the seat on the bench. Push the guides forward using a release control bow. Only for BRAVO version, release memory A control lever spring using appropriate pliers. Unscrew rear guide retaining bolts B.

2. Move the guides back using the release control bow. Unscrew front bolts C retaining the guides on the inside and outside.

3. Remove the guides.

Do not remove the control bow before removing the guides in order to prevent deformation that could impair operation.

NOTE Reverse removal instructions to refit. Tighten retaining bolts to a torque of 2.4 daNm.