Internal tailgate moulding (one) - r+r
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Tailgate/flap › Internal tailgate moulding (one) - r+r
‹ Prev Tailgate compartment seal - r+rNext › Single tailgate lock - r+r or repair with panel/protection removed
Body fittingsInternal tailgate moulding (one) - r+r
INTERNAL TAILGATE MOULDING (ONE) - R+R
Removing
- Open the tailgate.
- Turn the ignition key to the OFF position.
- Disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| BATTERY | See A001 BATTERY |
1. Use a cutter to cut the anchorage points (1a) shown in the figure. Prise up moulding (1b) and turn down, taking care not to damage the wiring connected to the third brake light.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1878077000 | Knife | Retainer removal |
1. Disconnect the electrical connection (1a) and remove the moulding (1b) from the tailgate.
| Description | Connector | |
|---|---|---|
| 1a | ADDITIONAL REAR LIGHT (THIRD BRAKE LIGHT) | See F040 ADDITIONAL REAR LIGHT (THIRD BRAKE LIGHT) |
Refitting
- Connect the electrical connection to the third brake light.
| Description | Connector | |
|---|---|---|
| ADDITIONAL REAR LIGHT (THIRD BRAKE LIGHT) | See F040 ADDITIONAL REAR LIGHT (THIRD BRAKE LIGHT) |
- Place the moulding correctly in position in its housing and press on the mounting points to fit the clips.
- Reconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| BATTERY | See A001 BATTERY |
‹ Prev Tailgate compartment seal - r+rNext › Single tailgate lock - r+r or repair with panel/protection removed
Parts & tools for this job For 2005 Fiat Croma
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.