Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Croma Factory Service Manual (2005-2010)16 · Electrical equipment
16 · Electrical

Check alternator terminal "d+"

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Current generation › Check alternator terminal "d+"
Electrical equipmentCheck alternator terminal "d+"

CHECK ALTERNATOR TERMINAL "D+"

Check 5530AA

  • Connect the Examiner in Voltmeter mode with the positive terminal to terminal D+ of the alternator and the negative earthed
  • With the ignition on, ensure that the measured voltage is less than 5.5 Volt and that the generator warning light on the panel is on
  • If the voltage is interrupted, the alternator is inefficient and should be replaced
  • Start the engine and check, with voltage D+ greater than 5.5 Volt, that the generator warning light on the panel goes off and a correct battery recharging indication is displayed.

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.