Belt rewinding failure
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Seats › Belt rewinding failure
Fault diagnosisBelt rewinding failure
BELT REWINDING FAILURE
The seat belt does not rewind correctly and/or fully after the buckle is undone.
| 0 | PRELIMINARY CHECKS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
| Check visually for folds, fraying and/or damage to the belt that could prevent it from rewinding. | Move on to Step 1 | Folds are present on the front belt | Remove the folds and replace the belt if necessary | |
| Folds are present on the rear belt | Remove the folds and replace the belt if necessary Op. 7065B08 REAR SEAT BELT (ONE) WITH PRETENSIONER ON REEL, LEFT OR RIGHT - R.R. | |||
| Front belt strap damaged | Replace the front belt | |||
| Rear belt strap damaged | Replace the rear seat belt Op. 7065B08 REAR SEAT BELT (ONE) WITH PRETENSIONER ON REEL, LEFT OR RIGHT - R.R. | |||
| 1 | CHECK CORRECT INSTALLATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the system installation is correct. | End of diagnosis | Incorrect installation | Proceed as instructed in the |
Parts & tools for this job For 2005 Fiat Croma
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Croma
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.