Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Croma Factory Service Manual (2005-2010)22 · Fault diagnosis
22 · Diagnostics

Seat position memory not working

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Seats › Seat position memory not working
Fault diagnosisSeat position memory not working

SEAT POSITION MEMORY NOT WORKING

ELECTRIC SEATS

Electric seat position memorizing not working/not working properly

0PRELIMINARY CHECKSALL OKPROBLEMS ENCOUNTEREDACTION
Check whether the seat position has been memorized with the vehicle stationary or with the speed above 10 Km/h.Move on to Step 1The memorizing has taken place with the vehicle speed above 10 Km/h.Carry out the memorizing of the seat positions with the vehicle stationary or with the speed below 10 Km/h.
1CHECK ON SEAT CONTROL UNIT CONNECTIONSALL OKPROBLEMS ENCOUNTEREDACTION
Check that the connector is correctly fitted in the seat control unit and also check for oxidation at the connector/control unit contacts.Move on to Step 21. Connector partly fitted1. Fit the connector correctly in the control unit.
2. Presence of oxidation at the connector/control unit contacts.2. Clean the control unit/connector contacts using special products.
2CHECK ON SEAT CONTROL UNIT WIRINGALL OKPROBLEMS ENCOUNTEREDACTION

Check the condition of the wiring at the seat control unit see wiring diagram

See E3076 ELECTRICALLY-ADJUSTABLE SEATS

Move on to Step 3Tears in the control unit connection wiring or wires possibly detached from the wiring connector.Replace the torn/broken wiring.
3CHECK ON SEAT CONTROL UNITALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the seat position memory control unitEnd of diagnosisBreaks or openings in the seat control unit casing.

Replacement of seat position memory control unit

Op. 7045J50 DRIVER'S SIDE FRONT SEAT POSITION MEMORISATION SYSTEM ECU - R+R FOLLOWING ELECTRICAL WIRING CHECK

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.