Timing system – timing system shafts
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Engine unit › Timing system – timing system shafts
Manufacturing data and tolerancesTiming system – timing system shafts
TIMING SYSTEM – TIMING SYSTEM SHAFTS
| Measurement | Value | Validity |
|---|---|---|
| Nominal inlet shaft cam lift (mm) | 5.95 | 2.2 16V |
| Nominal exhaust cam lift (mm) | 5.95 | 2.2 16V |
| Camshaft end float (mm) | 0.100 ÷ 0.230 | 1.9 JTD 8V |
| Nominal inlet cam lift (mm) | 8.5 | 1.9 JTD 8V |
| Nominal exhaust cam lift (mm) | 9.0 | 1.9 JTD 8V |
| Camshaft first support diameter (mm) | 43.600 ÷ 43.615 | 1.9 JTD 16V |
| Camshaft second support diameter (mm) | 43.400 ÷ 43.415 | 1.9 JTD 16V |
| Camshaft third support diameter (mm) | 43.200 ÷ 43.215 | 1.9 JTD 16V |
| Camshaft fourth support diameter (mm) | 43.000 ÷ 43.015 | 1.9 JTD 16V |
| Camshaft fifth support diameter (mm) | 30.000 ÷ 30.015 | 1.9 JTD 16V |
| Nominal inlet/exhaust cam lift (mm) | 8.0 | 1.9 JTD 16V |
| Camshaft support diameter (mm) | 26.045 ÷ 26.070 | 1.9 JTD 8V |
Parts & tools for this job For 2005 Fiat Croma
- PARTEngine gasket setSearch: Fiat Croma 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.