Diesel injection system ecu - r+r
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Diesel fuel injection › Diesel injection system ecu - r+r
EngineDiesel injection system ecu - r+r
Diesel injection system ecu - r+r
Removing
Disconnect the battery negative terminal.
1. Undo the retaining nuts.
2. Disconnect the electrical connection from the injection control unit.
| Name | Connector | |
|---|---|---|
| 2 | Engine management ECU | M10 |
3. Remove engine control unit.
Refitting
Fit the control unit in its seat.
Tighten the nuts retaining the control unit to the bodyshell.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Nut | DIESEL INJECTION ECU | M6 | 0.75 |
Connect the electrical connection to the control unit.
| Name | Connector | |
|---|---|---|
| Engine management ECU | M10 |
Connect the battery negative terminal.
Parts & tools for this job For 2000 Fiat Doblò
- PARTGlow plugsSearch: Fiat Doblò 2000 glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.