Fuel pressure sensor - r r

Operation 1060G28 · Pressure pump electric control

Removing

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

1. Disconnect the electrical connection from the air flow meter.

2. Loosen the band and disconnect the the turbocharger air inlet sleeve from the rigid pipe, air flow meter side.

1. Loosen the band (1a) and disconnect the flexible hose (1b) from the air intake.

2. Remove the air filter (2a) complete with air flow meter (2b) by releasing from the underlying pins and then from the rear fastening.

1. Disconnect the electrical connection from the fuel pressure sensor.

2. Undo and remove the fuel pressure sensor.

Refitting

1. Refit the fuel pressure sensor and tighten it to the specified torque.

2. Connect the electrical connection to the fuel pressure sensor.

Position the air filter complete with air flow meter in its seating, engaging it in the rear attachment and then in the underlying pins.

Connect the flexible hose to the air intake on the crossmember and tighten the fixing band.

Connect the air intake sleeve to the turbocharger, air flow meter side, and tighten the band.

Connect the electrical connection to the air flow meter.

Connect the battery negative terminal.