Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)08 · Engine
08 · Engine

Injector high pressure, fuel circuit leakage test

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Diesel fuel injection › Injector high pressure, fuel circuit leakage test
EngineInjector high pressure, fuel circuit leakage test

Injector high pressure, fuel circuit leakage test

Check 1060C

Disconnect the electrical connections from all the fuel injectors.

Disconnect the fuel recirculation pipes from all the fuel injectors.

Block the pipe so that no fuel can come out during the test.

Injector high pressure, fuel circuit leakage test

Turn the ignition key to the start position for 5 seconds and visually inspect that the quantity of recirculation fuel which comes out of the injector connections is more or less the same for all of them, and is very little.

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.