Pressure pump pulley - r r

Operation 1060E30 · Diesel pressure pump

Removing

Position the vehicle on the ramp.

Proceed with the removal - 4450B04 right front wheel r r.

Proceed with the removal - 1092G10 single engine belt r r.

Proceed with the removal - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with the removal - 1008A46 cam shaft left rigid mount - r r.

Proceed with the removal - 1032D12 timing system protective cover(s) - r + r.

Proceed with the removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

1. Screw two bolts in the appropriate seats to stop the rotation of the pressure pump pulley.

2. Undo the pressure pump drive pulley nut.

Remove the two bolts used to stop the rotation of the pressure pump pulley.

1. Remove the pressure pump pulley (1a) using the tool (1b).

Refitting

Place the pressure pump drive pulley back in its housing and secure with the nut but do not tighten.

Screw two bolts in the appropriate seats to stop the rotation of the pressure pump pulley.

1. Tighten the nut (1a) securing the pressure pump drive pulley using tool (1b).

Remove the two bolts used to stop the rotation of the pressure pump pulley.

Proceed with the refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with the refitting - 1032D12 timing system protective cover(s) - r + r.

Proceed with the refitting - 1008A46 cam shaft left rigid mount - r r.

Proceed with the refitting - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with the refitting - 1092G10 single engine belt r r.

Proceed with the refitting - 4450B04 right front wheel r r.

Remove the car from the ramp.