Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)08 · Engine
08 · Engine

Fuel filler pipe union sleeve - r + r

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Fuel tank and pipes › Fuel filler pipe union sleeve - r + r
EngineFuel filler pipe union sleeve - r + r

Fuel filler pipe union sleeve - r + r

Operation 1040A32 · FUEL TANK AND COMPONENTS

1.2 8v, 1.4 8v

Removing

Disconnect the battery negative terminal.

Place the car on a ramp.

Raise the vehicle.

Op. 7055B43 REAR WHEEL ARCH LINER (ONE) LEFT OR RIGHT - R.R.

1. Unscrew the retaining bolts.

2. Remove the pipe protection bracket.

Fuel filler pipe union sleeve - r + r

1. Open the band and disconnect the flexible section of the filler pipe from the tank.

2. Open the band and disconnect the flexible section of the filler pipe from the rigid section.

3. Open the plastic band (3a) and remove the flexible section of the fuel filler pipe (3b).

Fuel filler pipe union sleeve - r + r

Refitting

Position the flexible section of the fuel filler pipe.

Connect the flexible section of the fuel filler pipe to the tank and to the rigid section.

Fit the pipe protection bracket and tighten the fixing bolts.

Op. 7055B43 REAR WHEEL ARCH LINER (ONE) LEFT OR RIGHT - R.R.

Lower the vehicle.

Remove the vehicle from the ramp.

Connect the battery negative terminal.

1.9 DIESEL

Removing

Disconnect the battery negative terminal.

Place the car on a ramp.

Raise the vehicle.

Op. 7055B43 REAR WHEEL ARCH LINER (ONE) LEFT OR RIGHT - R.R.

1. Unscrew the retaining bolts

2. Remove the pipe protection bracket

Fuel filler pipe union sleeve - r + r

1. Open the band and disconnect the flexible section of the filler pipe from the tank.

2. Open the band and disconnect the flexible section of the filler pipe from the rigid section.

3. Open the plastic band (3a) and remove the flexible section of the fuel filler pipe (3b).

Fuel filler pipe union sleeve - r + r

Refitting

Position the flexible section of the fuel filler pipe.

Connect the flexible section of the fuel filler pipe to the tank and to the rigid section.

Fit the pipe protection bracket and tighten the fixing bolts.

Op. 7055B43 REAR WHEEL ARCH LINER (ONE) LEFT OR RIGHT - R.R.

Lower the vehicle.

Remove the vehicle from the ramp.

Connect the battery negative terminal.

1.3 JTD 16V, 1.9 JTD 8V

Removing

Position the vehicle on the ramp.

Proceed with the removal

Op. 7055B43 REAR WHEEL ARCH LINER (ONE) LEFT OR RIGHT - R.R.

(Right side).

1. Undo the bolts (1a) and remove the protective bracket (1b).

Fuel filler pipe union sleeve - r + r

1. Loosen the bands (1a) and (1b), open the band (1c) and remove the hose joining the fuel filler pipe to the tank (1d).

Fuel filler pipe union sleeve - r + r

Refitting

Place the hose joining the fuel filler pipe to the tank back in its housing and fasten it using the bands.

Refit the protective bracket in its seating and secure it with its bolts.

Proceed with the refitting

Op. 7055B43 REAR WHEEL ARCH LINER (ONE) LEFT OR RIGHT - R.R.

(Right side).

Remove the car from the ramps.

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.