Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Ducato Factory Service Manual (2002-2006)19 · Body panels and frame
19 · Body & interior

Rear bumper - side element

Make
Fiat
Model
Ducato Factory Service Manual
Year
2002–2006
Section
Removing refitting › Rear bumper - side element
Body panels and frameRear bumper - side element

REAR BUMPER - SIDE ELEMENT

Operation 7210E68 · EXTERNAL PARTS

Removing

- Disconnect the negative battery terminal.

Op. 5540A44 L/H OR R/H TAIL LIGHT (ONE) - R+R

1. Undo the bolts fixing the rear bumper side element.

- Open the rear swing doors.

2. Undo the bolt fixing the bumper side element.

3. Remove the rear bumper side element.

REAR BUMPER - SIDE ELEMENT

Refitting

- Place the bumper side element in the correct fitting position.

- Fasten the bumper side element to the bodyshell tightening the fixing bolts.

Op. 5540A44 L/H OR R/H TAIL LIGHT (ONE) - R+R

- Connect the negative battery terminal.

Parts & tools for this job For 2002 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.