HANDBRAKE CABLE REAR SECTION (ONE) - R.R.

Operation 3380A33 · HANDBRAKE CONTROL AND LINKAGE

2.0 16V · BIPOWER

Removing

- Position the vehicle on the lift.

- Disconnect the handbrake cable from the rear brake caliper.

1. Disconnect the handbrake cable from the idler.

2. Remove the rear section of the handbrake cable.

Carry out the same operation for the other section of the rear handbrake cable.

Refitting

- Connect the section of the handbrake cable for the rear brakes to the idler and to the rear brake caliper.

- Proceed with the adjustment of the handbrake cable.

Op. 3380A04 HANDBRAKE - CHECK TRAVEL

- Remove the vehicle from the lift.