FUEL LINE FROM MANIFOLDS - R R

Operation 1040B54 · FUEL SUPPLY/RETURN CIRCUIT PIPE

2.3 JTD 16V

Removing

- Position the vehicle on the lift.

- Raise the lift.

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Release the front return pipe from the fastening springs.

1. Disconnect the rapid connectors (1a) joining the front section to the rear section and remove the coupling (1b).

- Lower the lift.

1. Disconnect the front return pipe from the fuel return manifold.

2. Remove the front return pipe from the engine compartment.

Refitting

- Fit the front return pipe in the engine compartment.

- Connect the front return pipe to the fuel return manifold.

- Raise the lift.

- Connect the rapid connectors joining the front and rear sections to the coupling.

- Secure the front return pipe to the fastening springs.

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Lower the vehicle.

- Remove the vehicle from the lift.

2.0 JTD 8V

Removing

- Position the vehicle on the lift.

- Disconnect the negative battery terminal.

See in Op. 1048A10

1. Disconnect the front return pipe from the manifold.

- Open the bands fastening the pipe in the engine compartment.

- Raise the lift.

1. Disconnect the rapid connector.

2. Remove the front fuel return pipe.

- Release the pipe from the retaining springs.

Refitting

- Fit the front fuel return pipe and connect it to the rear return pipe.

- Secure the pipe to the retaining springs.

- Lower the lift.

- Connect the front return pipe to the manifold.

- Secure the bands fastening the pipe in the engine compartment.

See in Op. 1048A10

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

2.8 JTD 8V

Removing

- Position the vehicle on the lift.

- Disconnect the negative battery terminal.

See in Op. 1048B14

1. Open the retaining bands.

2. Remove the pipe.

Refitting

- Fit the pipe in place.

- Renew the retaining bands.

See in Op. 1048B14

- Connect the negative battery terminal.

- Remove the vehicle from the lift.