Label not available
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Fuel tank and pipes › Label not available
LABEL NOT AVAILABLE
Removing
- Disconnect the negative battery terminal.
1. Disconnect the electrical connection (1a) and undo the fixing nuts (1b), then remove the inertia switch assembly and bracket (1c).
2. Undo the fixing bolts (2a) and separate the inertia switch (2b) from the bracket.
Refitting
- Fit the inertia switch to the bracket.
- Tighten the bolts fixing the inertia switch to the bracket.
- Fit the inertia switch in place complete with bracket.
- Tighten the nuts fixing the inertia switch mounting bracket.
- Connect the electrical connection for the inertia switch.
- Connect the negative battery terminal.
Removing
- Disconnect the negative battery terminal.
1. Disconnect the electrical connection for the inertia switch.
| Description | Connector | |
|---|---|---|
| 1 | Inertia switch | I050 |
2. Undo the fixing bolts (2a) and remove the inertia switch (2b).
Refitting
- Connect the electrical connector for the inertia switch.
| Description | Connector | |
|---|---|---|
| Inertia switch | I050 |
- Fasten the inertia switch tightening the fixing bolts.
- Connect the negative battery terminal.
Removing
- Disconnect the negative battery terminal.
1. Disconnect the electrical connection for the inertia switch.
| Description | Connector | |
|---|---|---|
| 1 | Inertia switch | I050 |
2. Undo the fixing bolts (2a) and remove the inertia switch (2b).
Refitting
- Connect the electrical connector for the inertia switch.
| Description | Connector | |
|---|---|---|
| Inertia switch | I050 |
- Fasten the inertia switch tightening the fixing bolts.
- Connect the negative battery terminal.
Removing
- Disconnect the negative battery terminal.
1. Disconnect the electrical connection for the inertia switch.
| Description | Connector | |
|---|---|---|
| 1 | Inertia switch | I050 |
2. Undo the fixing bolts (2a) and remove the inertia switch (2b).
Refitting
- Connect the electrical connector for the inertia switch.
| Description | Connector | |
|---|---|---|
| Inertia switch | I050 |
- Fasten the inertia switch tightening the fixing bolts.
- Connect the negative battery terminal.
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.