Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Ducato Factory Service Manual (2002-2006)08 · Engine
08 · Engine

Label not available

Make
Fiat
Model
Ducato Factory Service Manual
Year
2002–2006
Section
Fuel tank and pipes › Label not available
EngineLabel not available

LABEL NOT AVAILABLE

Operation 1040A32 · FUEL TANK AND COMPONENTS

2.0 16V

Removing

1. Undo the lower bolt fixing the filler pipe to the bodyshell.

2. Act on the retaining bands (2a) and release and remove the fuel filler pipe hose (2b).

LABEL NOT AVAILABLE

Refitting

- Connect the hose joining the filler pipe to the tank to the tank and to the filler pipe.

- Restore the fastenings removed previously.

- Tighten the lower bolts fixing the filler pipe to the bodyshell.

2.3 JTD 16V

Removing

- Position the vehicle on a lift.

- Raise the lift.

Op. 7055B54 UNDER-ENGINE GUARD - R R

1. Undo the lower bolts fixing the fuel filler pipe to the bodyshell.

2. Disconnect the hose joining the filler pipe to the tank from the tank and from the filler pipe, then remove it.

LABEL NOT AVAILABLE

Refitting

- Connect the hose joining the filler pipe to the tank to the tank and to the filler pipe, then remove it.

- Tighten the lower bolts fixing the fuel filler pipe to the bodyshell.

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Lower the lift.

- Remove the vehicle from the lift.

2.0 JTD 8V

Removing

- Position the vehicle on a lift.

- Raise the lift.

Op. 7055B54 UNDER-ENGINE GUARD - R R

1. Undo the lower bolts fixing the filler pipe to the bodyshell.

2. Disconnect the hose joining the filler pipe to the tank from the tank and from the filler pipe, then remove it.

LABEL NOT AVAILABLE

Refitting

- Connect the hose joining the filler pipe to the tank to the tank and to the filler pipe, then remove it.

- Tighten the lower bolts fixing the filler pipe to the bodyshell.

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Lower the lift.

- Remove the vehicle from the lift.

2.8 JTD 8V

Removing

- Position the vehicle on the lift.

- Raise the lift.

Op. 7055B54 UNDER-ENGINE GUARD - R R

1. Undo the lower bolts fixing the filler pipe to the bodyshell.

2. Disconnect the hose joining the filler pipe to the tank from the tank and from the filler pipe, then remove it.

LABEL NOT AVAILABLE

Refitting

- Connect the hose joining the filler pipe to the tank to the tank and to the filler pipe, then remove it.

- Tighten the lower bolts fixing the filler pipe to the bodyshell.

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Lower the lift.

- Remove the vehicle from the lift.

Parts & tools for this job For 2002 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.