GPL FILLER FITTING R R

Operation 1043A30 · GPL TANK

2.0 16V

Removing

Drain the section of the pipe from the LPG filler to the tank, following the instructions in the procedure:

Op. 1043A02 LPG SYSTEM LINES PIPE DRAINING OPERATIONS

Position the vehicle on the lift.

Disconnect the negative battery terminal.

1. Working from inside the load carrying compartment, release the retaining buttons (1a) and remove the left side trim (1b).

1. Loosen the retaining bands.

2. Release the corrugated pipe protecting the LPG filler pipe.

1. Undo the connector for the LPG filler pipe from the filler.

1. Undo and remove the LPG filler pipe cap.

2. Undo the retaining bolts (2a) and remove the LPG filler (2b).

Refitting

Position the LPG filler in the housing and tighten the fixing bolts.

Working from inside the load carrying compartment, tighten the connector for the LPG filler pipe to the filler to the recommended torque.

Position the corrugated pipe protecting the LPG filler pipe and tighten the retaining bands.

Tighten the LPG filler cap.

Op. 1043A04 GPL SYSTEM AND PIPES CHECK FOR LEAKS

Position the load carrying compartment left side trim using retaining buttons.

Connect the negative battery terminal.