GPL TANK GUARD PROTECTION R R

Operation 1043E12 · PROTECTIONS FASTENINGS

2.0 16V

Removing

Position the vehicle on the lift.

1. Position a hydraulic support under the LPG canister guard.

2. Undo the fixing bolts around the perimeter and the four centre ones, keep the washers.

3. Lower the hydraulic support and remove the LPG tank guard.

Refitting

Check the condition of the LPG tank, in other words there should be no cracks, cuts or any type of dents. If this is not the case, proceed with replacing the guard.

Position the LPG tank guard on the hydraulic support.

Position the fixing bolts and washers.

Tighten the fixing bolts to the recommended torque.

Remove the hydraulic support.

Remove the vehicle from the lift.