Valve tappets - check clearance
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Timing system › Valve tappets - check clearance
EngineValve tappets - check clearance
VALVE TAPPETS - CHECK CLEARANCE
See in Op. 1016A20
1. Position each cam facing upwards and check that the clearance corresponds to the recommended values.
| Subject | Value | |
|---|---|---|
| 1 | VALVE TAPPETS | mm |
| Inlet valve clearance check | 0,15 - 0,25 | |
| Exhaust valve clearance check | 0,35 - 0,45 |
Removing
See in Op. 1016A10
See in Op. 1016A20
Op. 4450B04 RIGHT FRONT WHEEL R R
1. Using a feeler gauge (1a), measure the clearance (1b) between the camshaft lift and a tappet shim.
- Rotate the camshaft and check the clearance for all the tappets working on the crankshaft pulley.
| Subject | Value | |
|---|---|---|
| TAPPET SHIM | mm | |
| Inlet valves clearance in closed position | 0.45 - 0.55 | |
| Exhaust valves clearance in closed position | 0.45 - 0.55 |
Refitting
Op. 4450B04 RIGHT FRONT WHEEL R R
See in Op. 1016A20
See in Op. 1016A10
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.