FLYWHEEL ON CAMSHAFT - R.R.

Operation 1036B50 · OVERHEAD CAMSHAFT

2.0 JTD 8V

Removing

Op. 7055B54 UNDER-ENGINE GUARD - R R

Op. 4450B04 RIGHT FRONT WHEEL R R

Op. 1092G10 SINGLE ENGINE BELT R R

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

1. Using the tool (1a), undo the bolts fixing the timing drive pulley (1b) and loosen the bolt (1c) fixing the flywheel underneath.

2. Remove the toothed camshaft pulley

1. Undo the bolt (1a) loosened previously and remove the flywheel (1b).

Refitting

- Fit the flywheel on the camshaft and tighten the fixing bolt.

- Fit the toothed timing drive pulley and screw in the fixing bolts without tightening them.

- Using the tool, stop the rotation of the toothed timing drive pulley and tighten the flywheel fixing bolt to torque.

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.

Op. 1092G10 SINGLE ENGINE BELT R R

Op. 4450B04 RIGHT FRONT WHEEL R R

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Remove the vehicle from the lift.