Crankshaft and flywheel – crankshaft
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine › Crankshaft and flywheel – crankshaft
Tightening torquesCrankshaft and flywheel – crankshaft
CRANKSHAFT AND FLYWHEEL – CRANKSHAFT
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| (engine crankcase side) 4.5 -5.5 | Bolt | LOWER CRANKCASE | M14 | 2.8 JTD 16V |
| (engine crankcase side) 4.5 -5.5 | Bolt | LOWER CRANKCASE | M14 | 2.8 JTD 16V |
| 4,5 - 5,5 + 63° | Bolt | CONNECTING ROD CAPS | M12 | 2.8 JTD 16V |
| 4,5 - 5,5 + 63° | Bolt | CONNECTING ROD CAPS | M12 | 2.8 JTD 16V |
| 1,8 | Bolt | OIL SUMP | M8 | 2.8 JTD 16V |
| (engine crankcase side) 2.5 | Bolt | REAR COVER CRANKSHAFT | M8 | 2.8 JTD 16V |
| (engine crankshaft side) 2.7 -3.3 + 90° | FLYWHEEL (MECH.) | M12 | 2.8 JTD 16V | |
| (Engine crankshaft side) 13.6 -16.8 | Bolt | CLUTCH ASSEMBLY | M12 | 2.8 JTD 16V |
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.