Engine supercharging system – turbocharger assembly
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine › Engine supercharging system – turbocharger assembly
‹ Prev Diesel fuel injection system – diesel injection pressure pump electronic controlNext › Inlet and exhaust manifolds – inlet manifolds
Tightening torquesEngine supercharging system – turbocharger assembly
ENGINE SUPERCHARGING SYSTEM – TURBOCHARGER ASSEMBLY
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2.2 | Nut | EXHAUST MANIFOLD/S | M8 | 2.3 JTD 16V |
| (body block) 5 | Nuts | FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT | M10 | 2.3 JTD 16V |
| (Rigid mount on engine) 5 | Bolt | FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT | M10 | 2.3 JTD 16V |
| (Rigid mount on engine) 8 | Nut | FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT | M12 | 2.3 JTD 16V |
| 2.6 | Bolt | REAR SILENCER EXHAUST | M8 | 2.3 JTD 16V |
| 2.6 | Nuts | EXHAUST PIPE TO ENGINE | M8 | 2.3 JTD 16V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2.2 | Nut | EXHAUST MANIFOLD/S | M8 | 2.3 JTD 16V |
| (body block) 5 | Nuts | FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT | M10 | 2.3 JTD 16V |
| (Rigid mount on engine) 5 | Bolt | FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT | M10 | 2.3 JTD 16V |
| (Rigid mount on engine) 8 | Nut | FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT | M12 | 2.3 JTD 16V |
| 2.6 | Bolt | REAR SILENCER EXHAUST | M8 | 2.3 JTD 16V |
| 2.6 | Nuts | EXHAUST PIPE TO ENGINE | M8 | 2.3 JTD 16V |
| (cylinder head side) 2.5 | Nut | EXHAUST MANIFOLD/S | M8 X 1,25 | 2.8 JTD 8V |
| (Cylinder head side) 2.1 -2.6 | Nut | EXHAUST MANIFOLD/S | M8 | 2.8 JTD 8V |
| 2,5 | Nut | EXHAUST MANIFOLD/S | M8 X 1,25 | 2.8 JTD 8V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2,0 | Nut | EXHAUST MANIFOLD/S | 2.0 JTD 8V | |
| 2,3 | Nut | INLET MANIFOLD | T.T | |
| Bolts | LOWER LINK ON GEARBOX | T.T | ||
| Bolt | LOWER LINK ON GEARBOX | T.T |
‹ Prev Diesel fuel injection system – diesel injection pressure pump electronic controlNext › Inlet and exhaust manifolds – inlet manifolds
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.